User Manual Q&AAnswer
Dec 19, 2024 - 03:26 AM
To program the Philips remote control to operate your TV, you can follow the Direct Code Entry method. Here are the step-by-step instructions:
1. Locate the Code List included with your remote. Find the section for the type of device you wish to control (e.g., TV).
2. Locate the brand of your TV and circle all the remote codes for that brand in the Code List.
3. Press and hold down the SETUP button on the remote until the red light on the remote control turns on. Release the SETUP button. The red light will remain on.
4. Press and release the TV button on the remote. The red light will blink once and remain on.
5. Use the number buttons on the remote to enter the first 4-digit remote code you circled in the Code List. The red light will turn off after entering the fourth digit.
6. Point the remote at your TV and test the buttons on the remote to see if the TV responds as expected. If the buttons do not operate the TV, repeat steps 4 and 5 with the next code you circled for your TV brand.
7. Repeat steps 4-6 for each TV brand code you circled until you find a code that works for your TV.
8. Once you find a code that works, press and release the ENTER button to save the code in the remote.
Note: If you do not find a remote code that works for your TV or there are no codes in the Code List for your TV brand, you can try the Auto Code Search method as an alternative.
For more detailed instructions and troubleshooting tips, you can refer to the user manual provided with the Philips remote control.
Add New Comment