User Manual Q&AAnswer
Dec 19, 2024 - 01:51 AM
To connect the Kicker 46KISLOC2 line output converter to your car's stereo system, follow these steps:
1. Start by splicing the wire using a wire splicer. Remove the wire insulation from both ends of the wire that you want to splice.
2. Repeat the same procedure for the remote wire of the line output converter.
3. Twist both wires together that are to be spliced.
4. Run the twisted wires on one side of a buck connector and crimp the top of the connector to ensure a strong connection.
5. Cut the wires that are going to be spliced and connect them together by twisting them together.
6. Connect the RCA cables by connecting the blue wire to the positive terminal and the red wire to the negative terminal.
For more detailed instructions and illustrations, please refer to the owner's manual included in the box.
Note: It is always recommended to consult a professional or refer to the specific instructions provided by the manufacturer for your car's stereo system before attempting any installation or modification.
Add New Comment