User Manual Q&AAnswer
Dec 19, 2024 - 01:47 AM
To install the Dash Cam Hardwire Kit, please follow these steps:
1. Locate a suitable fuse in your vehicle's fuse box that is only powered when the ignition is on. Refer to your vehicle's manual or consult a professional if you are unsure which fuse to use.
2. Connect the red wire from the hardwire kit to the positive terminal of the chosen fuse. You may need to use a fuse tap or add-a-circuit adapter to make the connection.
3. Connect the black wire from the hardwire kit to a suitable ground point in your vehicle. This can be a metal bolt or xxxx near the fuse box.
4. Connect the mini USB end of the hardwire kit to the dash cam.
5. Once all the connections are secure, tuck away any excess wires and ensure they are not interfering with any moving parts or obstructing your view while driving.
6. Test the dash cam to ensure it is receiving power and recording properly.
Please note that the installation process may vary depending on your vehicle's make and model. It is recommended to consult the user manual or seek professional assistance if you are unsure about any step of the installation process.
Add New Comment