User Manual Q&AAnswer
Dec 19, 2024 - 01:36 AM
To mount the On-Dashboard DC44 Camera Video Recorder Dashcam, follow these steps:
1. Choose the desired mounting location on your car's windshield. It is recommended to mount the dashcam on the passenger side, not the driver's side, for optimal visibility and safety.
2. Clean the mounting surface thoroughly to ensure proper adhesion. Use a clean cloth or alcohol wipe to remove any dirt, dust, or grease.
3. Peel off the protective film from the adhesive mount or suction mount provided with the dashcam.
4. Align the mount with the chosen location on the windshield and firmly press it against the glass to secure it in place. If using an adhesive mount, make sure to hold it in place for a few seconds to ensure proper adhesion.
5. Once the mount is securely attached, attach the dashcam to the mount by sliding it into the designated slot or using the provided attachment mechanism.
6. Connect the wire from the charging spot of your car to the dashcam. This will provide power to the dashcam and allow it to function properly.
7. Your On-Dashboard DC44 Camera Video Recorder Dashcam is now ready to use. You can adjust the angle of the dashcam as needed for optimal recording.
Please refer to the instruction manual provided with the product for more detailed information and illustrations on mounting the dashcam.
Add New Comment