User Manual Q&AAnswer
Dec 19, 2024 - 01:27 AM
The installation of the HD eRapta ERT01 Backup Camera Rear View is simple and can be done by following these steps:
1. Start by connecting the camera's power to the reverse light of your vehicle. This will ensure that the camera turns on automatically when you shift into reverse.
2. Next, use the provided 26-foot RCA wire to connect the camera to your radio screen or monitor. The RCA connector should be compatible with your device. Simply plug one end of the RCA wire into the camera and the other end into the RCA input of your screen or monitor.
3. Once the connections are made, you can mount the camera on your vehicle. The HD eRapta ERT01 Backup Camera Rear View is designed for surface mount installation, so find a suitable location on the rear of your vehicle and secure the camera using the provided mounting hardware.
4. Finally, test the camera by shifting your vehicle into reverse. The camera should turn on automatically and display the rear view on your screen or monitor.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment