User Manual Q&AAnswer
Dec 19, 2024 - 12:53 AM
To install and set up the Elgato Wave Mic Arm, follow these steps:
1. Start by attaching the desk clamp to your desk. Ensure that the clamp is securely tightened to prevent any movement or instability.
2. Next, attach the riser extension to the arm stand. This will allow you to adjust the height of the arm according to your preference.
3. Connect your microphone to the Wave Mic Arm using the appropriate mount adaptor. The arm supports 1/4-inch, 3/8-inch, and 5/8-inch mic mounts.
4. Adjust the arm to your desired position by loosening the tension xxxx and moving the arm up or down. Once you have set the desired height, tighten the tension xxxx to secure the arm in place.
5. Use the swivel base to adjust the angle of the microphone. Loosen the swivel xxxx , position the microphone as needed, and then tighten the xxxx to lock it in place.
6. To manage the cables, utilize the hidden cable channels on the arm stand. These channels allow you to route the microphone cable neatly, reducing clutter on your desk.
For more detailed instructions and illustrations, refer to the Quick Start Guide included in the box.
Add New Comment