Answer
Dec 19, 2024 - 12:30 AM
To change the light mode on the Energizer E303230400 IPX4 Water Resistant Head Light, follow these steps:
1. Locate the power button on the headlamp. It is usually located on the top or side of the lamp.
2. Press the power button once to turn on the headlamp. It will default to the high mode, which provides maximum brightness.
3. To switch to the low mode, press the power button again. The low mode conserves battery life while still providing sufficient light for general use.
4. If you need minimal light or want to preserve your night vision, press the power button again to activate the red mode. This mode emits a dim red light.
5. To use the headlamp as a signaling light for emergencies or to alert others to your presence, press the power button again to activate the flashing red mode.
6. To turn off the headlamp, press and hold the power button for a few seconds until the light turns off.
Note: The specific order of the light modes may vary depending on the headlamp model. Please refer to the user manual for your specific model for detailed instructions.
For more information and illustrations, please refer to the user manual provided with the Energizer E303230400 IPX4 Water Resistant Head Light.
Add New Comment