User Manual Q&AAnswer
Dec 18, 2024 - 11:52 PM
To change the battery in your JONES CLOCKS JVEN120 The Ketchup Wall Clock, please follow these steps:
1. Locate the battery compartment on the back of the clock. It is usually situated in the center or towards the bottom of the clock.
2. Use a small screwdriver or your fingers to gently open the battery compartment cover. Be careful not to apply too much force to avoid damaging the cover.
3. Insert one AA alkaline battery into the battery compartment, making sure to align the positive (+) and negative (-) ends of the battery with the corresponding markings inside the compartment.
4. Close the battery compartment cover securely until it clicks into place. Ensure that the cover is fully closed to maintain the clock's water resistance.
5. Once the new battery is installed, the clock should start working again. If not, double-check that the battery is inserted correctly and has sufficient charge.
Note: It is recommended to use a high-quality AA alkaline battery for optimal performance and longer battery life. Regularly check the battery level and replace it as needed to ensure accurate timekeeping.
Add New Comment