User Manual Q&AAnswer
Dec 18, 2024 - 11:51 PM
To set up the Neewer USB Microphone Kit, follow these steps:
1. Put the foam cap on the microphone by twisting it down in place.
2. Attach the microphone to the metal shock mount by sliding and twisting the microphone gently into the center hole of the shock mount.
3. Fix the stand by unthreading the xxxx plate and gently sliding it into the side of your desk or table.
4. Re-tighten the xxxx plate until it is secured properly.
5. The scissor arm stand has two ends, one is the metal one and the other is the black slot. Put the black slot into the black bar of the mounting clamp on the table.
6. Rotate the wheel on the mounting clamp to secure the arm properly.
7. xxxx the metal shock mount into the metal end of the scissor arm stand.
8. To install the pop-filter, simply place it onto one of the scissor arms.
9. Twist the wheel to tighten it properly.
10. Rotate the bendable arm of the pop filter according to your need.
For more detailed instructions, please refer to the user manual included in the Neewer USB Microphone Kit.
Add New Comment