User Manual Q&AAnswer
Dec 18, 2024 - 11:41 PM
To adjust the microphone stand with different compatible microphones, follow these steps:
1. Start by loosening the xxxx on the boom arm scissor to unlock it.
2. Adjust the boom arm scissor to the desired height and angle by extending or retracting it.
3. Once you have positioned the boom arm scissor, tighten the xxxx to secure it in place.
4. If your microphone has a different diameter than the default size of the shock mount, you can modify the shock mount's O-rings. This allows you to adjust the diameter of the mic clip to accommodate microphones with varying sizes.
5. Loosen the O-rings on the shock mount and adjust them to fit the diameter of your microphone.
6. Once the O-rings are adjusted, tighten them to secure the microphone in the shock mount.
7. Attach the shock mount to the boom arm scissor using the provided xxxx adapter.
8. Ensure that the microphone is securely attached to the shock mount.
9. Finally, connect the microphone stand to a stable surface using the table mounting clamp with the sponge cushion. Adjust the clamp to fit the thickness of the surface and tighten it securely.
By following these steps, you can easily adjust the microphone stand to accommodate different compatible microphones and achieve the desired positioning for your recording needs.
Add New Comment