User Manual Q&AAnswer
Dec 18, 2024 - 11:04 PM
To install the BV BL-001 5-LED Bike Headlight, follow these steps:
1. Battery Installation:
a. Twist the rear cap of the headlight counterclockwise to remove it.
b. Insert four AAA batteries into the compartment, aligning them according to the indicated polarity (+/-).
c. Reattach the rear cap by twisting it clockwise until it is secure.
2. Mounting the Headlight:
a. Place the bracket onto the handlebar.
b. Tighten the bracket by turning the xxxx clockwise until it is secure.
c. Slide the headlight onto the bracket until it clicks into place.
3. Adjust the Angle:
Ensure the headlight is angled correctly to illuminate the path ahead.
To detach the headlight, press the release button on the bracket and slide the headlight forward to remove it.
For the taillight installation, open the battery compartment using a coin, insert two AAA batteries, close the compartment securely, attach the bracket to the desired mounting location on the bike, and mount the taillight onto the bracket until it clicks into place.
Please refer to the "Installation Instructions" section of the user manual for visual illustrations and additional details.
Add New Comment