User Manual Q&AAnswer
Dec 18, 2024 - 10:09 PM
To replace the batteries in the IPIDIPI TOYS LW01 Light Up Spinner Toy, please follow these steps:
1. Locate the battery compartment on the toy. It is usually located on the bottom or back of the toy.
2. If the battery compartment has a xxxx securing it, use a screwdriver to remove the xxxx and open the compartment. If there is no xxxx , the compartment may have a latch or sliding cover that you can easily open.
3. Once the battery compartment is open, you will see slots or holders for the batteries. Take note of the polarity markings inside the compartment, which indicate the correct orientation of the batteries.
4. Remove the old batteries from the slots or holders. If the batteries are stuck, gently tap the toy or use a small tool to carefully pry them out.
5. Insert three new AA batteries into the slots or holders, making sure to align the positive (+) and negative (-) ends of the batteries with the corresponding markings inside the compartment.
6. Close the battery compartment securely. If there was a xxxx , reinsert it and tighten it with a screwdriver.
7. Test the toy by pressing the button or switch to activate the lights. If the lights do not turn on, double-check that the batteries are inserted correctly and have enough charge.
Note: The IPIDIPI TOYS LW01 Light Up Spinner Toy does not come with batteries included, so you will need to purchase three AA batteries separately.
If you encounter any difficulties or have further questions, please refer to the IPIDIPI TOYS LW01 Light Up Spinner Toy User Manual or contact IPIDIPI TOYS for assistance.
Add New Comment