User Manual Q&AAnswer
Dec 18, 2024 - 10:08 PM
To pair your Skullcandy Dime TWS Earbuds with your device, follow these steps:
1. Remove the earphones from the charging case and clean the charging contact points of any stickers.
2. Charge the earphones in the case for about 30 minutes until the LEDs glow red to indicate they are charging.
3. Once charged, remove the earbuds from the case. Both earbuds will turn on automatically, and the LEDs will glow blue as they sync.
4. You'll hear a voice prompt that says "Pairing" once the earbuds have synchronized. The left earbud will start flashing red/blue.
5. Turn on Bluetooth on your device and search for "Dime" in the list of available Bluetooth devices.
6. Select "Dime" to pair with your device. You'll hear a voice prompt that says "Connected" once the pairing is successful.
Note: If the earbuds don't automatically enter pairing mode, you can manually put them into pairing mode by holding the button for 4 seconds.
For more detailed instructions and troubleshooting tips, refer to the Skullcandy Dime TWS Earbuds Instruction Manual provided in the box or visit the Skullcandy website for further assistance.
Add New Comment