User Manual Q&AAnswer
Dec 18, 2024 - 09:16 PM
To charge the Energizer ENHDFRLP2A Rechargeable LED Headlamp, follow these steps:
1. Locate the USB charging port on the headlamp. It is usually located on the side or back of the headlamp.
2. Connect one end of the included USB charging cable to the USB charging port on the headlamp.
3. Plug the other end of the USB charging cable into a USB power source, such as a computer, wall adapter, or power bank.
4. Ensure that the USB charging cable is securely connected to both the headlamp and the power source.
5. The charging indicator on the headlamp will light up to indicate that the charging process has started. The indicator may be a solid light or a flashing light, depending on the model.
6. Allow the headlamp to charge fully. The charging time may vary, but it typically takes approximately 4 hours to fully charge the headlamp.
7. Once the headlamp is fully charged, the charging indicator will turn off or change color to indicate that the charging process is complete.
8. Disconnect the USB charging cable from the headlamp and the power source.
Your Energizer ENHDFRLP2A Rechargeable LED Headlamp is now ready to use. Make sure to fully charge the headlamp before each use for optimal performance.
Add New Comment