User Manual Q&AAnswer
Dec 18, 2024 - 05:45 AM
The JBL Tune 510BT headphones can be powered on and connected in two ways: automatic pairing and manual pairing.
Automatic Pairing:
1. Ensure that the headphones are turned off.
2. Press and hold the power button for about 2 seconds until the LED light starts flashing blue.
3. The headphones will automatically enter pairing mode and the LED light will flash blue and white alternately.
4. On your device, go to the Bluetooth settings and select "JBL Tune 510BT" from the list of available devices.
5. Once connected, the LED light will turn solid blue.
Manual Pairing:
1. Ensure that the headphones are turned off.
2. Press and hold the power button for about 5 seconds until the LED light starts flashing blue.
3. On your device, go to the Bluetooth settings and select "JBL Tune 510BT" from the list of available devices.
4. If prompted, enter the passcode "0000" to complete the pairing process.
5. Once connected, the LED light will turn solid blue.
Note: The headphones can remember up to 8 paired devices. If you want to connect to a different device, make sure to disconnect or turn off Bluetooth on the currently connected device before attempting to connect to the new device.
For more detailed instructions and troubleshooting, please refer to the Quick Start Guide provided in the box.
Add New Comment