User Manual Q&AAnswer
Dec 18, 2024 - 05:39 AM
To pair the 3M WorkTunes Connect + AM/FM Hearing Protector headphones with your device, please follow these steps:
1. Turn on the headphones by pressing and holding the power button for 3 seconds. You will hear "Power On" through the Voice Assist feature.
2. After turning on the headphones, double-press the button on the right earcup to enter pairing mode. You will hear "Bluetooth Pairing ON" through the Voice Assist.
3. Make sure your Bluetooth-enabled device is scanning for nearby devices.
4. On your device, check if "WorkTunes Connect" has been identified in the list of available Bluetooth devices.
5. Select "WorkTunes Connect" on your device to connect to the hearing protector. Once connected, you will hear "Bluetooth Connected" through the Voice Assist, and the LED on the right earcup will turn blue.
6. Your device will now regulate the level of your Bluetooth audio. You can control the audio playback using the buttons on the right earcup. Double-click the button to advance songs, tap three times to go back to the previous track, and use the controls on your device for volume adjustment and other playback functions.
7. When you turn on the hearing protector in the future, it will automatically connect to your smartphone, and you will hear "Bluetooth Connected" through the Voice Assist.
Please note that some devices may not be compatible with the playback control functionality on the headphones, in which case, you will need to use the controls on your device.
For any further assistance or troubleshooting, please refer to the instruction manual provided with the headphones.
Add New Comment