User Manual Q&AAnswer
Dec 18, 2024 - 05:36 AM
To connect the Sony WH-RF400 headphones to your TV, you can follow these steps:
1. Check if your TV has a headphone jack or an audio out port. This is usually located on the side or back of the TV and is labeled as "headphone" or "audio out."
2. If your TV has a headphone jack, simply plug the headphone transmitter into the headphone jack using the provided audio cable.
3. If your TV has an audio out port, connect one end of the audio cable to the audio out port on your TV and the other end to the headphone transmitter.
4. Once the transmitter is connected to your TV, turn on the headphones and set them to the same channel as the transmitter. You can do this by using the channel selector switch on both the transmitter and the headphones.
5. Adjust the volume on your TV to a high level and then adjust the volume on the headphones to the desired listening level using the volume control on the headphones.
6. You should now be able to hear the audio from your TV through the Sony WH-RF400 headphones.
If you encounter any issues or need further assistance, please refer to the instruction manual provided with the headphones.
Add New Comment