User Manual Q&AAnswer
Dec 18, 2024 - 04:05 AM
To pair the Perytong Bluetooth Sleep Headband to your device, please follow these steps:
1. Make sure the Bluetooth on your device is turned on.
2. Turn on the Perytong Sleep Headphones by holding down the ON/OFF button for about three seconds. A digital voice will say "Power On".
3. On your device, go to the Bluetooth settings and search for available devices.
4. Look for the Perytong Sleep Headband in the list of available devices and select it.
5. The headphones will automatically pair to the previously connected device. If you want to pair to a new device, unpair and cancel the connection from the previous device first.
6. Once the pairing is successful, you should hear a confirmation sound or voice prompt from the headphones.
If you are still experiencing difficulties with pairing, try the following troubleshooting steps:
1. Make sure the headphones are within the Bluetooth range of your device (approximately 10 meters).
2. Ensure that the headphones are fully charged. A low battery level may affect the pairing process.
3. Restart both your device and the headphones, then attempt the pairing process again.
4. If possible, try pairing the headphones with a different device to see if the issue persists. This can help determine if the problem lies with the headphones or the original device.
If you have followed these steps and are still unable to pair the headphones to your device, please refer to the user manual or contact the Perytong customer support for further assistance.
Add New Comment