User Manual Q&AAnswer
Dec 18, 2024 - 03:42 AM
Cleaning the AoliGer JY-03 Electric Mosquito Zapper is a simple process. Here are the steps to follow:
1. Turn off and unplug the zapper: Before cleaning the device, ensure that it is turned off and unplugged from the power source for safety.
2. Remove the collection tray: Locate the collection tray at the bottom of the zapper. Gently slide it out to remove it from the device.
3. Dispose of dead insects: Empty the collection tray and dispose of any dead insects that have accumulated. You can do this by shaking the tray over a trash bin or using a small brush to brush off the debris.
4. Clean the collection tray: Rinse the collection tray with water to remove any remaining debris. You can also use a mild detergent if necessary. Make sure to dry the tray thoroughly before reinserting it into the zapper.
5. Clean the mesh: Use the provided cleaning brush to gently brush off any dead insects or debris that may have accumulated on the mesh. Be careful not to damage the mesh while cleaning.
6. Wipe the exterior surfaces: Use a damp cloth to wipe down the exterior surfaces of the zapper. Avoid using strong chemicals or abrasive materials that may damage the plastic.
7. Reassemble and plug in the zapper: Once the zapper and collection tray are clean and dry, reinsert the tray back into the device. Plug in the zapper and turn it on to resume its mosquito-zapping function.
Regular cleaning of the AoliGer JY-03 Electric Mosquito Zapper will help maintain its effectiveness and ensure that it continues to attract and eliminate flying insects.
Add New Comment