User Manual Q&AAnswer
Dec 18, 2024 - 03:32 AM
Changing the wax cubes in the EQUSUPRO Fireplace Electric Wax Warmer is a simple process. Here are the step-by-step instructions:
1. Unplug the warmer: Before changing the wax cubes, always make sure to unplug the warmer from the power outlet to ensure safety.
2. Allow the warmer to cool: Give the warmer some time to cool down before attempting to change the wax cubes. This will prevent any accidental burns.
3. Remove the top tray: The top tray of the warmer is where the wax cubes are placed. Carefully lift and remove the top tray from the warmer. It should come off easily.
4. Dispose of the used wax: If there is any remaining wax in the tray, dispose of it properly. You can discard it in a trash bin or recycle it if applicable.
5. Clean the tray: If there is any residue or buildup on the tray, clean it with warm soapy water. Make sure to dry it thoroughly before using it again.
6. Place new wax cubes: Take your desired wax cubes or tarts and place them in the top tray of the warmer. Make sure not to overfill the tray, as this can cause the wax to spill over.
7. Reassemble the warmer: Once you have placed the new wax cubes in the tray, carefully place the tray back into the warmer. Ensure that it is properly aligned and securely in place.
8. Plug in and enjoy: Plug the warmer back into the power outlet and turn it on according to the desired settings. The new wax cubes will gradually melt, releasing their fragrance into the room.
Remember to follow the care and maintenance instructions provided in the manual to keep your EQUSUPRO Fireplace Electric Wax Warmer in optimal condition.
Add New Comment