User Manual Q&AAnswer
Dec 18, 2024 - 03:21 AM
Installing the batteries for the LED lights in the CUTE STONE Doll House with Light is a simple process. Here are the step-by-step instructions:
1. Locate the battery compartment: The battery compartment is usually located on the back or bottom of the dollhouse. It may be secured with a small xxxx or latch.
2. Open the battery compartment: Use a screwdriver or your fingers to open the battery compartment. Be careful not to force it open to avoid damaging the compartment or the dollhouse.
3. Insert the LR44 batteries: Take three LR44 button batteries and insert them into the battery compartment, following the polarity markings (+ and -) inside the compartment. Make sure to align the batteries correctly to ensure proper functioning of the LED lights.
4. Close the battery compartment: Once the batteries are inserted, close the battery compartment securely. Ensure that it is tightly closed to prevent the batteries from falling out during play.
5. Test the LED lights: Flip the switch on the LED lights to the desired setting (always on, slow flashing, fast flashing, or off) and check if the lights are working properly. If the lights do not turn on, double-check the battery installation and ensure the switch is in the correct position.
Please refer to the "Setup Guide" section of the user manual for additional details and illustrations on installing the batteries for the LED lights.
Add New Comment