User Manual Q&AAnswer
Dec 18, 2024 - 02:50 AM
Installing the LSE Lighting PLL36WT UV Bulb is a straightforward process. Here are the step-by-step instructions:
1. Ensure safety: Before starting the installation, make sure the power is turned off and the fixture is unplugged to avoid any electrical accidents.
2. Remove the old bulb (if applicable): If there is an existing bulb in the fixture, carefully remove it by gently twisting it counterclockwise until it comes loose. Set aside the old bulb for proper disposal.
3. Prepare the new bulb: Take the LSE Lighting PLL36WT UV Bulb out of its packaging. Avoid touching the glass directly with your fingers, as oils from your skin can damage the bulb or affect its performance.
4. Insert the new bulb: Align the pins on the base of the bulb with the corresponding slots in the fixture. Gently push the bulb into the socket and twist it clockwise until it locks securely in place.
5. Test the installation: Once the bulb is properly installed, plug in the fixture and turn on the power. Check if the bulb lights up and emits UV-C light. If the bulb does not light up, double-check the connection and ensure the power supply is functioning correctly.
Please note that these instructions are general guidelines, and it's always recommended to consult the specific instructions provided in the product manual for your particular fixture. Additionally, ensure that you follow all safety precautions and guidelines outlined in the manual to avoid any accidents or damage.
Add New Comment