User Manual Q&AAnswer
Dec 18, 2024 - 02:38 AM
Cleaning the Jawlark Electric Mosquito Zapper is a simple process. Here's a step-by-step guide:
1. Unplug the zapper: Before cleaning, always make sure to unplug the device to ensure safety.
2. Remove the collection tray: The zapper has a detachable tray at the bottom that collects dead insects. Gently slide out the tray from the device.
3. Use the included brush: The zapper comes with a cleaning brush specifically designed to remove debris from the collection tray and the interior mesh grid. Use the brush to sweep away any dead insects or other debris.
4. Clean the tray: Empty the contents of the collection tray into a trash bag or bin. Wash the tray with warm soapy water to remove any remaining residue. Rinse it thoroughly and dry it before placing it back into the zapper.
5. Clean the mesh grid: While the tray is removed, use the brush to clean the interior mesh grid of the zapper. Sweep away any accumulated bug residue or debris. Be careful not to apply too much force to avoid damaging the wires.
6. Reassemble and plug in: Once the tray and mesh grid are clean and dry, slide the tray back into the zapper. Make sure it is securely in place. Plug the zapper back into a power source, and it will be ready to use again.
Regularly cleaning the collection tray and mesh grid will help maintain the effectiveness of the Jawlark Electric Mosquito Zapper. It is recommended to clean the zapper every few days or as needed, depending on the level of insect activity.
Add New Comment