User Manual Q&AAnswer
Dec 18, 2024 - 02:20 AM
Cleaning the Mindful Design Electric Farmhouse Wax Warmer is simple and important for its maintenance. Here are the steps to clean the wax warmer:
1. Before cleaning, always turn off the warmer and unplug it from the power source to avoid any accidents or burns.
2. Clean the ceramic bowl: After each use, remove any remaining wax from the ceramic bowl. You can do this by allowing the wax to cool and harden, then gently scraping it off with a soft cloth or plastic scraper. Avoid using sharp objects that may damage the bowl.
3. Wash the ceramic bowl: Once the wax has been removed, wash the ceramic bowl with warm, soapy water. Use a mild dish soap and a soft cloth or sponge to gently clean the bowl. Rinse it thoroughly to remove any soap residue.
4. Wipe the outside: To clean the exterior of the wax warmer, use a soft, damp cloth. Avoid using abrasive cleaners or rough materials that may scratch the surface. Make sure to dry the exterior completely after cleaning.
5. Check the cord: Regularly inspect the 42-inch power cord for any signs of damage or wear. If you notice any fraying or exposed wires, it is recommended to replace the cord for safety reasons.
6. Remove hardened wax: If there is any hardened wax stuck to the warmer, you can use the low heat setting to soften it. Once softened, gently wipe it off with a soft cloth.
7. Store properly: If you are not going to use the wax warmer for an extended period, store it in a cool and dry place away from direct sunlight. This will help preserve its condition.
Remember to always follow the manufacturer's instructions and safety guidelines when cleaning and maintaining the wax warmer.
Add New Comment