User Manual Q&AAnswer
Dec 18, 2024 - 02:03 AM
To change the light bulb in the SALKING MT-JJ186 Electric Ceramic Wax Warmer, please follow these steps:
1. Ensure that the wax warmer is turned off and unplugged from the power source.
2. Allow the wax warmer to cool down completely before attempting to change the light bulb.
3. Locate the light bulb holder on the wax warmer. It is usually located underneath the dish where the wax melts are placed.
4. Gently twist the light bulb holder counterclockwise to remove it from the wax warmer.
5. Carefully remove the old light bulb from the holder.
6. Insert a new 25W Edison bulb into the holder, ensuring that it is securely in place.
7. Align the light bulb holder with the designated slot on the wax warmer and twist it clockwise to lock it into position.
8. Once the light bulb is securely installed, you can plug in the wax warmer and turn it on to enjoy the soft glow and fragrance.
Note: It is important to use a 25W Edison bulb that is compatible with the SALKING MT-JJ186 Electric Ceramic Wax Warmer. Regular household bulbs may not fit or function properly. Always refer to the user manual or contact SALKING customer service for any specific instructions or recommendations regarding the light bulb replacement.
Add New Comment