User Manual Q&AAnswer
Dec 18, 2024 - 01:54 AM
Programming the Odyssea 9274238 LED Aquarium Timer Module is a straightforward process. Here are the step-by-step instructions:
1. Ensure that the timer module is properly connected to your aquarium light fixture and that the power cord is securely plugged into an electrical outlet.
2. Press the touch control button on the timer module to wake it up.
3. Press and hold the touch control button for a few seconds until the display shows the current time.
4. Use the touch control button to adjust the hours and minutes to match the current time. Press the button to switch between hours and minutes.
5. Once the current time is set, press and hold the touch control button again for a few seconds until the display shows the programming mode.
6. Use the touch control button to navigate through the different programming options, such as setting the on and off times for each lighting mode.
7. To set the on time for a specific lighting mode, select the mode using the touch control button and press it once to enter the on time setting. Use the button to adjust the hours and minutes for the on time.
8. Repeat the same process to set the off time for the selected lighting mode.
9. After setting the on and off times for a mode, press the touch control button to move on to the next mode and repeat the process.
10. Once you have programmed all the desired lighting modes, press and hold the touch control button for a few seconds to save the settings and exit the programming mode.
11. The timer module will now automatically control the on and off times of your aquarium lights according to the programmed schedule.
Please refer to the Odyssea 9274238 LED Aquarium Timer Module User Manual for any additional details or troubleshooting tips.
Add New Comment