User Manual Q&AAnswer
Dec 18, 2024 - 01:51 AM
To install the Current 4192 Tank Mount Lighting Bracket on your aquarium, follow these steps:
1. Ensure that your tank is clean and free from any debris or obstructions.
2. Identify the desired location on the tank's edge where you want to mount the bracket. Make sure it is a sturdy and secure area.
3. Open the adjustable clamp by pressing the release button on the side.
4. Position the bracket on the tank's edge, aligning the clamp with the desired location.
5. Firmly press the clamp onto the tank's edge, ensuring a tight and secure fit.
6. Use the included screws to tighten the clamp, if necessary, for added stability.
7. Attach the adjustable tank-mounting arm to the bracket by sliding it into the designated slot.
8. Adjust the height and angle of the arm to your desired position by loosening the screws and tightening them once you have achieved the desired angle.
9. Attach the light clips to the arm, ensuring they are securely in place.
10. Place your LED lights into the clips, making sure they are properly aligned and secured.
11. Connect the power source to your LED lights and turn them on to test the installation.
Please refer to the installation manual provided with the product for more detailed instructions and illustrations.
Add New Comment