User Manual Q&AAnswer
Dec 18, 2024 - 01:41 AM
To change the lighting effects on the TOPBRY BP-004 Remote Controlled Air Stone Disk, follow these steps:
1. Ensure that the air stone disk is properly connected to the power supply and the LED lights are turned on.
2. Take the provided remote control and make sure it has working batteries (2 x AA batteries, not included).
3. Point the remote control towards the air stone disk, ensuring that there is a clear line of sight between the remote and the device.
4. Press the "MODE" button on the remote control to cycle through the available lighting modes. The four lighting modes are FLASH, STROBE, FADE, and SMOOTH. Each press of the "MODE" button will switch to the next lighting mode.
5. To change the color of the LED lights, press the "COLOR" button on the remote control. This will cycle through the available colors, allowing you to choose the desired color for your aquarium.
6. Adjust the brightness of the LED lights by pressing the "BRIGHTNESS" button on the remote control. There are seven levels of brightness to choose from, allowing you to find the perfect lighting intensity for your aquarium.
7. Experiment with different lighting modes, colors, and brightness levels to create the desired ambiance and visual effects in your aquarium.
Note: If the remote control is not working, make sure that the batteries are properly inserted and try replacing them if necessary. Also, ensure that you are within the remote control range, which is typically up to 16.4 feet.
For more detailed instructions and information, please refer to the user manual provided with the TOPBRY BP-004 Remote Controlled Air Stone Disk.
Add New Comment