User Manual Q&AAnswer
Dec 18, 2024 - 12:38 AM
Installing the Pawfly Naludo-NL127 Fish Tank Airstone Bubble Diffuser in your aquarium is a straightforward process. Here are the step-by-step instructions:
1. Gather the necessary materials: You will need the Pawfly Naludo-NL127 Airstone Bubble Diffuser, a suction cup, and an airline connector (included in the package).
2. Choose the desired location: Decide where you want to place the airstone in your aquarium. It is recommended to position it near the water surface for optimal oxygenation.
3. Attach the suction cup: Take the suction cup and wet it with water. Press it firmly onto the bottom of the airstone.
4. Connect the airline tubing: Take the airline connector and insert one end into the airstone's opening. Ensure it fits securely.
5. Attach the other end of the airline tubing: Connect the other end of the airline tubing to your air pump. Make sure it is tightly connected to prevent air leakage.
6. Secure the airstone in the aquarium: Place the suction cup with the attached airstone inside the aquarium. Press it firmly against the glass or any smooth surface to ensure it stays in place.
7. Test the setup: Turn on your air pump and check if the airstone is producing a steady stream of bubbles. If not, double-check the connections and make sure the air pump is functioning correctly.
8. Adjust the position if necessary: Observe the flow of bubbles and adjust the position of the airstone if needed to achieve the desired water circulation and oxygenation.
That's it! Your Pawfly Naludo-NL127 Fish Tank Airstone Bubble Diffuser should now be properly installed and providing efficient oxygenation for your aquarium.
Add New Comment