User Manual Q&AAnswer
Dec 18, 2024 - 12:37 AM
Installing the Pawfly Naludo-UL123 Aquarium Air Stone Disc Bubbler is a simple process. Here are the step-by-step instructions:
1. Gather the necessary materials: You will need the Pawfly Naludo-UL123 Aquarium Air Stone Disc Bubbler, an air pump (not included), and standard airline tubing (approximately 3/16 inches).
2. Soak the air stone: Before using the air stone for the first time, soak it in water for 15-30 minutes. This will ensure optimal performance.
3. Connect the airline tubing: Take the standard airline tubing and connect it to the airline connector provided with the air stone. Ensure a secure connection.
4. Attach the air stone to the tank: Place the air stone at the desired location in your aquarium. Use the suction cup provided to securely attach the air stone to the bottom of the tank. Make sure the suction cup is clean and in good condition for a strong hold.
5. Connect the air pump: Connect the other end of the airline tubing to the air pump. Make sure the air pump is working properly and placed on a stable surface.
6. Power on the air pump: Turn on the air pump to start the airflow. The Pawfly Naludo-UL123 Aquarium Air Stone Disc Bubbler will start producing fine bubbles, improving water oxygenation and circulation in your aquarium.
Note: It is important to regularly clean the air stone and check for any blockages to maintain its effectiveness. Soak the air stone in vinegar or use a brush to remove any debris or mineral build-up every 2-4 weeks.
If you have any further questions or need assistance, please refer to the Pawfly Naludo-UL123 Aquarium Air Stone Disc Bubbler User Manual or contact Pawfly customer support at support@pawfly.com or 1-800-Pawfly.
Add New Comment