User Manual Q&AAnswer
Dec 18, 2024 - 12:07 AM
Cleaning the AquaNeat AS-A597x12 Aerator Stone is important to maintain its optimal performance. Here are the steps to clean the aerator stone:
1. Remove the aerator stone from the tank or pond.
2. Prepare a mixture of water and white vinegar or an aquarium-safe cleaner. The ratio should be approximately 1 part cleaner to 3 parts water.
3. Submerge the aerator stone in the cleaning solution and let it soak for about 15-30 minutes. This will help loosen any debris or mineral deposits.
4. After soaking, use a soft brush (such as a toothbrush) to gently scrub the surface of the aerator stone. Be careful not to apply too much pressure to avoid damaging the stone.
5. Rinse the aerator stone thoroughly with clean water to remove any remaining cleaning solution.
6. Inspect the stone for any remaining debris or mineral buildup. If necessary, repeat the soaking and scrubbing process until the stone is clean.
7. Once clean, reinstall the aerator stone in the tank or pond, ensuring it is securely attached using the suction cup.
Regularly cleaning the AquaNeat AS-A597x12 Aerator Stone will help prevent clogging and maintain optimal airflow and bubble production.
Add New Comment