User Manual Q&AAnswer
Dec 17, 2024 - 11:56 PM
To connect your device to the Pyle PPHP1244B Powered Bluetooth Speaker, follow these steps:
1. Press the "MODE" button on the speaker or remote control to choose the input signal source as the BT channel.
2. Make sure the Bluetooth function on your device is enabled and within range of the speaker.
3. Scan for available Bluetooth devices on your device.
4. Select the "PYLEUSA" Bluetooth network name from the list of available devices.
5. If prompted, enter the pairing code (usually "0000" or "1234") on your device.
6. Once the connection is successful, you will hear a "tick" tone from the speaker.
7. You can now play music wirelessly from your device through the speaker.
Note: If the speaker cannot be connected, try restarting both the speaker and your device and repeat the pairing process. It is also recommended to keep the Bluetooth and mobile phone facing each other for better signal stability.
For more detailed instructions, please refer to the "BUILT-IN WIRELESS BT STREAMING FUNCTION" section in the user manual.
Add New Comment