User Manual Q&AAnswer
Dec 17, 2024 - 11:52 PM
To set the alarm values on your Amemo Ossimetri25 Pulse Oximeter, please follow these steps:
1. Turn on the device by pressing the power button once.
2. Once the device is powered on, press the button again to enter the settings mode. The display should indicate that you are in the settings mode.
3. Use the button to navigate through the different settings options until you reach the alarm settings.
4. Once you are in the alarm settings, you can use the button to adjust the alarm thresholds for both your heart rate and blood oxygen levels.
5. To adjust the heart rate alarm threshold, use the button to increase or decrease the value. Once you have set the desired heart rate threshold, press the button to confirm the selection.
6. Repeat the same process to set the alarm threshold for your blood oxygen levels. Use the button to adjust the value and press the button to confirm.
7. After setting both alarm thresholds, press and hold the button for a few seconds to exit the settings mode.
Once you have set the alarm values, the Amemo Ossimetri25 Pulse Oximeter will notify you with an audible alarm if your heart rate or blood oxygen levels exceed or fall below the predefined thresholds. This feature is particularly useful during activities like exercise or sleep when continuous monitoring is desired. For more detailed instructions, please refer to the user manual provided with the product.
Add New Comment