User Manual Q&AAnswer
Dec 17, 2024 - 11:48 PM
To pair your KINDRM IT210 Bluetooth Aux Adapter with your phone, please follow these steps:
1. Make sure the adapter is powered on by pressing and holding the power button for a few seconds until the LED light turns on.
2. On your phone, go to the Bluetooth settings. This is usually found in the Settings menu or the quick settings panel.
3. Turn on Bluetooth on your phone if it's not already enabled.
4. In the Bluetooth settings, search for available devices. The KINDRM IT210 should appear in the list of available devices as "Bluetooth music" or a similar name.
5. Tap on the KINDRM IT210 in the list to initiate the pairing process.
6. Once you select the adapter, it will start pairing with your phone. The LED light on the adapter will start flashing to indicate it's in pairing mode.
7. After a successful pairing, the LED light on the adapter will stop flashing and remain solid.
8. You can now start playing music or making calls through the adapter. The audio will be wirelessly transmitted from your phone to the adapter.
Note: Before pairing, make sure your phone is not already connected to any other Bluetooth devices. If your phone can find the adapter but fails to pair, try deleting the device from your phone's Bluetooth settings and then attempt to pair again.
If you encounter any issues during the pairing process, refer to the user manual for troubleshooting tips or contact the manufacturer's customer support for further assistance.
Add New Comment