User Manual Q&AAnswer
Dec 17, 2024 - 11:42 PM
To connect your Kinivo BTC450 Bluetooth Car Kit to your car stereo, follow these steps:
1. Clean the back of the receiver unit and the position in your car where you want to install the receiver.
2. Peel one side of the adhesive disc and place it on the back of the receiver unit. Peel the other side of the adhesive disc and place the receiver in an ideal position in the car.
3. Plug the car kit’s 3.5mm cable into the AUX input audio jack on the car stereo. Adjust your car stereo’s settings to AUX input.
4. Plug the car power adapter into the car.
Once you have completed these steps, the car kit will automatically power on when the car is switched on. You can then use the car stereo controls to adjust volume levels and follow the Bluetooth pairing instructions in the manual to connect your device to the car kit.
For more detailed information and troubleshooting tips, please refer to the Kinivo BTC450 Bluetooth Car Kit User Manual.
Add New Comment