User Manual Q&AAnswer
Dec 17, 2024 - 11:07 PM
To install the Hygger HG-707 Aquarium Submersible Wave Maker Pump in your aquarium, follow these steps:
1. Assemble the main pump body with the suction cup.
2. Choose the desired location in your tank to mount the pump.
3. Plug the pump into a power outlet using 100-110V/60Hz direct.
4. Use the articulating ball joint to rotate the pump to your desired location.
5. Use the modulator on the air pump to adjust the airflow volume and control the amount of air bubbles produced.
6. Ensure that the pump is fully submerged for quiet operation.
7. Make sure the magnetic sheet is close to the mount base.
8. Clean the impeller monthly to ensure long-lasting use of your pump.
For more detailed instructions and safety precautions, please refer to the Hygger HG-707 Aquarium Submersible Wave Maker Pump User Manual.
Add New Comment