User Manual Q&AAnswer
Dec 17, 2024 - 11:00 PM
Adjusting the flow rate of the YCTECH 360° Aquarium Wave Maker Pump is a simple process. Here are the steps to follow:
1. Locate the pump in your aquarium and ensure it is fully submerged in water.
2. To adjust the flow rate, rotate the pump in the desired direction. The pump can rotate 360°, allowing you to control the flow and direct it to specific areas of your tank.
3. Experiment with different positions and angles to find the optimal flow rate for your tank. You can observe the water movement and make adjustments accordingly.
4. Keep in mind that the YCTECH 360° Aquarium Wave Maker Pump has a flow rate of 2000 L/H (528 GPH), which is suitable for tanks that are about the same size. If you have a smaller tank, you may want to reduce the flow rate by adjusting the pump's position.
By adjusting the rotation of the pump, you can customize the water flow to meet the needs of your tank. It's important to find the right balance to ensure proper oxygenation and filtration while avoiding excessive water movement that may stress your aquatic life.
Add New Comment