User Manual Q&AAnswer
Dec 17, 2024 - 10:59 PM
Installing the AQUANEAT 480GPH Aquarium Wave Maker is a simple process. Here are the step-by-step instructions:
1. Choose the desired location: Determine where you want to place the wave maker in your aquarium. It is recommended to position it in an area that allows for optimal water circulation.
2. Clean the aquarium wall: Before attaching the wave maker, clean the area of the aquarium wall where you plan to install it. This will ensure a secure attachment.
3. Attach the suction cup: Take the suction cup provided with the wave maker and moisten it with water. Press the suction cup firmly against the cleaned area of the aquarium wall. Make sure it is securely attached.
4. Mount the wave maker: Place the AQUANEAT 480GPH Aquarium Wave Maker onto the suction cup. Ensure that it is properly aligned and securely attached to the suction cup.
5. Adjust the direction: The wave maker features a 360° rotation capability. Use your hand to rotate the wave maker to the desired direction, ensuring that it provides optimal water flow and circulation in your aquarium.
6. Plug in the power cord: Connect the power cord of the wave maker to a suitable electrical outlet. Ensure that the outlet is safe and functioning properly.
7. Test the wave maker: Once the wave maker is installed and connected to power, turn it on and observe the water flow and circulation in your aquarium. Make any necessary adjustments to the direction or position of the wave maker to achieve the desired water movement.
Please refer to the AQUANEAT 480GPH Aquarium Wave Maker User Manual for additional information and safety precautions.
Add New Comment