Answer
Dec 17, 2024 - 10:54 PM
To change the lighting modes on the SZMiNiLED LFIA100 Submersible Aquarium Light, follow these steps:
1. Ensure that the light is plugged in and turned on.
2. Take the remote control that came with the light and remove the plastic film covering the battery section, if applicable.
3. Aim the remote control towards the light and make sure there are no obstructions between the remote and the light.
4. Press the "Mode" button on the remote control to cycle through the different lighting modes.
5. Each press of the "Mode" button will switch to the next lighting mode. The available lighting modes are Flash, Strobe, Faded, and Smooth.
6. Keep pressing the "Mode" button until you find the desired lighting mode for your aquarium.
7. Once you have selected the desired lighting mode, the light will automatically adjust to that mode.
Note: If the light does not respond to the remote control, make sure that the remote control is within the recommended range and that the batteries are properly inserted. If the issue persists, try replacing the batteries or contacting the manufacturer for further assistance.
Add New Comment