User Manual Q&AAnswer
Dec 17, 2024 - 10:52 PM
To pair the OiDiPi BT-6 Plus Bluetooth Receiver with your Bluetooth headphones, please follow these steps:
1. Ensure that the BT-6 Plus is fully charged. Connect it to an AC power source using the provided charging cable and allow it to charge completely.
2. Turn on the BT-6 Plus by pressing the power button. The device should power on and enter the default mode, which is the receiver mode (RX).
3. Put your Bluetooth headphones into pairing mode. Refer to the user manual of your headphones for specific instructions on how to enter pairing mode.
4. On the BT-6 Plus, press and hold the "M" button for a few seconds until the LED indicator starts flashing rapidly. This indicates that the BT-6 Plus is in pairing mode.
5. On your Bluetooth headphones, search for available Bluetooth devices. The BT-6 Plus should appear as "OiDiPi BT-6 Plus" or a similar name in the list of available devices.
6. Select the BT-6 Plus from the list on your headphones. The devices will attempt to establish a connection.
7. Once the pairing is successful, the LED indicator on the BT-6 Plus will stop flashing and remain solid. You should also hear a confirmation sound in your headphones.
8. Test the connection by playing audio from your device. The sound should now be transmitted to your Bluetooth headphones through the BT-6 Plus.
If the devices are still not connecting, try the following troubleshooting steps:
- Make sure that the BT-6 Plus is within range of your Bluetooth headphones (typically up to 10 meters) and that there are no obstacles blocking the signal.
- Ensure that your Bluetooth headphones are fully charged and in pairing mode.
- Restart both the BT-6 Plus and your Bluetooth headphones.
- Forget the BT-6 Plus from the Bluetooth settings on your device and repeat the pairing process from step 3.
If you continue to experience difficulties with pairing, refer to the troubleshooting section of the user manual or contact OiDiPi customer support for further assistance.
Add New Comment