User Manual Q&AAnswer
Dec 17, 2024 - 10:31 PM
To pair the Anself Wireless Earbuds with your device, follow these steps:
1. Make sure the earbuds are charged and turned off.
2. Take both earbuds out of the charging case.
3. Press and hold the multi-function key on BOTH the left and right earbuds for 3 seconds until the blue light flashes and a voice prompt says "POWER ON."
4. The earbuds' LEDs will flash blue and red, indicating they are in pairing mode.
5. On your device, go to the Bluetooth settings and search for available devices.
6. Select "A6S pro" from the list of available devices to pair with the earbuds.
7. Once connected, you will hear a voice prompt saying "Connected" and the earbuds' LEDs will stop flashing.
Note: If you have previously paired the earbuds with a device, they will automatically connect to that device when powered on. If you want to pair them with a different device, make sure to disconnect them from the previous device first.
For more detailed instructions, please refer to the user manual provided in the box.
Add New Comment