User Manual Q&AAnswer
Dec 17, 2024 - 06:17 AM
To install the GE Personal Security Window and Door Alarm, follow these steps:
1. Using the double-sided adhesive tape provided, mount the alarm and magnetic sensor on the window, door, or cabinet to be protected. Place one unit on the part of the fixture that opens (window) and the other unit on the stationary part of the fixture (frame).
2. Mount the units so that when the window, door, or cabinet is closed, the gap between the alarm and sensor is no more than 0.5 inches (preferably less).
3. To arm the unit, slide the cover off the battery compartment located on the front of the main unit. Toggle the ON/OFF switch to the ON position. The window on the housing will become red. Replace the battery compartment cover.
4. Whenever the protected window, door, or cabinet is opened (causing the alarm to be separated from the magnetic sensor by more than 0.5 inches), the alarm siren will sound continuously until disarmed.
5. To disarm the unit, slide the cover off the battery compartment. Toggle the ON/OFF switch to the OFF position. Make sure the window, door, or cabinet is closed before rearming.
Please refer to the complete instruction manual for more detailed information on installation and usage.
Add New Comment