User Manual Q&AAnswer
Dec 17, 2024 - 06:12 AM
To thread the SINGER MX231 Mini Electric Sewing Machine, follow these step-by-step instructions:
1. Raise the threaded spindle (C) by pulling it upward until it is fully extended.
2. Place the thread spool (E) on the thread spindle (C).
3. Pull the thread from the thread spool (E) and put it through the first thread guide (1) in the direction towards the front of the machine.
4. Bring the thread across to the second thread guide (2), making sure it goes over the tension adjusting xxxx (Q) and is positioned between the two washers.
5. Pull the thread from the tension adjusting xxxx (Q) and then through the thread guide (3) in the direction towards the front of the machine.
6. Pull the thread through the thread guide (4) on the take-up lever (D), inserting it in the direction towards the front of the machine.
7. Pull the thread down to the thread guide (5) and insert it from the top downward.
8. Pull the thread downward through the thread guide (6). If necessary, lower the needle (R) by turning the hand wheel (K) slightly anti-clockwise.
9. Insert the thread through the eye (7) of the needle from the front toward the back of the machine. If necessary, raise the needle (R) by turning the hand wheel (K) clockwise.
10. Raise the presser foot (F) by lifting the lever on the back of the machine (G).
11. Pull approximately 25cm of thread through the needle (R) and lay it on the deck under the presser foot (F) running away from you.
Make sure to carefully follow these threading instructions and practice before beginning to sew. Improper threading can damage the lockstitch.
Add New Comment