User Manual Q&AAnswer
Dec 17, 2024 - 05:31 AM
To charge the CENSGO csdm11 USB Rechargeable LED Headlamp Beanie, follow these steps:
1. Connect the included USB charging cable to the headlamp and a power source, such as a computer, USB socket, power bank, or car charger.
2. Ensure that the connection between the USB cable and the headlamp is secure.
3. The indicator light on the headlamp will show the battery status. It will illuminate or change color to indicate that the battery is charging.
4. Allow the headlamp to charge until the indicator light shows that the battery is full. This typically takes about 2-4 hours, depending on the charging method used.
5. Once fully charged, disconnect the USB cable from the headlamp and the power source.
Note: It is important to avoid overcharging the battery. Charge the headlamp fully before extended periods of non-use to maintain battery health.
For more detailed instructions and safety precautions, please refer to the user manual included with your purchase.
Add New Comment