User Manual Q&AAnswer
Dec 17, 2024 - 03:26 AM
To calibrate the Holy Stone HS120D RC Drone, please follow the steps below:
1. Start by placing the drone on a flat and level surface. Make sure the drone is powered off.
2. Turn on the remote controller and the drone.
3. Once the drone is powered on, push the left joystick (throttle stick) to the highest position and then pull it back to the lowest position. This will activate the calibration mode.
4. After activating the calibration mode, the drone's indicator lights will start flashing rapidly.
5. Hold the remote controller level and parallel to the ground.
6. Move the left joystick to the upper-left corner and then to the lower-right corner. Repeat this movement three times.
7. After completing the joystick movement, the drone's indicator lights will stop flashing and remain solid, indicating that the calibration process is complete.
8. You can now power off the drone and remote controller.
It is important to note that calibrating the drone is necessary to ensure stable flight and accurate control. If you encounter any issues with the drone's stability or control, it is recommended to perform the calibration process again.
For more detailed instructions and illustrations, please refer to the Holy Stone HS120D RC Drone Instructions Manual provided above.
Add New Comment