User Manual Q&AAnswer
Dec 17, 2024 - 03:21 AM
To set the correct time on your Westclox 32042 Wall Clock, please follow these steps:
1. Locate the time-setting xxxx on the back of the clock. It is usually a small xxxx or wheel.
2. Gently turn the time-setting xxxx in the direction indicated (usually clockwise) to move the clock hands forward.
3. Continue turning the xxxx until the clock hands reach the desired time.
4. If you accidentally pass the desired time, you can turn the xxxx counterclockwise to move the hands backward.
5. Once the correct time is set, stop turning the xxxx .
6. Check the clock's accuracy by comparing it to a trusted time source, such as your phone or another clock.
Note: It's important to handle the clock hands with care and avoid applying excessive force. If the hands are stuck, gently move them to check if they are touching each other or the glass cover. Carefully straighten any bent hands and ensure they are securely attached to their posts.
If you encounter any difficulties or the clock does not keep accurate time after setting it, please refer to the troubleshooting section in the Westclox 32042 Wall Clock user manual or contact Westclox customer support for further assistance.
Add New Comment