User Manual Q&AAnswer
Dec 17, 2024 - 02:54 AM
Adjusting the height of the Donner DMS-1 Portable Metal Music Stand is a simple process. Here are the step-by-step instructions:
1. Start by unfolding the stand from its compact and folded position.
2. Locate the adjustable metal shaft of the stand. This is the part that connects the tripod base to the tiltable desk.
3. Look for the adjustment knobs or clamps on the metal shaft. These are used to secure the height of the stand.
4. Loosen the adjustment knobs or clamps by turning them counterclockwise. This will allow you to slide the metal shaft up or down.
5. Slide the metal shaft to the desired height. Make sure to align the holes or markings on the shaft with the corresponding holes or markings on the tripod base for stability.
6. Once you have set the desired height, tighten the adjustment knobs or clamps by turning them clockwise. This will secure the metal shaft in place.
7. Ensure that the stand is stable by making sure the tripod legs are fully extended and firmly placed on the ground.
8. You can make further adjustments to the height as needed by repeating steps 4-7.
By following these steps, you can easily adjust the height of the Donner DMS-1 Portable Metal Music Stand to your preferred position.
Add New Comment