User Manual Q&AAnswer
Dec 17, 2024 - 02:43 AM
To switch between different lighting modes on the Ascher HJ-045 tail light, you can follow these steps:
1. Locate the power button on the tail light. It is usually a single button located on the back or side of the light.
2. Press the power button to turn on the tail light. The default mode may vary, but it is typically the steady mode.
3. To switch to a different lighting mode, press the power button again. Each press will cycle through the available modes.
4. Continue pressing the power button until you reach the desired lighting mode. The available modes may include steady mode, flashing mode, and different brightness levels.
5. Once you have selected the desired lighting mode, the tail light will remain in that mode until you change it again.
Note: The specific number of lighting modes and their order may vary depending on the model of the HJ-045 tail light. It's advisable to refer to the user manual or product description for the exact details of the available lighting modes and their sequence.
If you encounter any difficulties or have further questions about operating the tail light, it's recommended to consult the user manual provided with the product. The manual should provide specific instructions and illustrations to guide you through the process.
Add New Comment