Answer
Dec 17, 2024 - 02:46 AM
To charge the Etsfmoa USB Rechargeable Unisex Beanie Cap, please follow these steps:
1. Remove the LED light from the beanie by gently pressing it back.
2. Connect the included USB cable to the LED light and a power source, such as a computer, USB wall adapter, or portable power bank.
3. Allow the LED light to charge for approximately 2 hours or until fully charged. The LED light has a built-in indicator that will turn off when fully charged.
4. Once fully charged, insert the LED light back into the beanie, ensuring it is positioned at the front.
5. Press the power button on the LED light to switch between the high, medium, and low brightness settings.
6. To turn off the light, press the power button again after selecting the low brightness setting.
Please note that it is important to remove the LED light before washing the beanie. The beanie itself can be hand washed in cold water with mild detergent and laid flat to dry. Avoid direct heat or sunlight, and do not bleach, iron, or tumble dry the beanie.
If you have any further questions or concerns, please refer to the user manual provided with your purchase or contact Etsfmoa's customer support at the provided email address or phone number.
Add New Comment