User Manual Q&AAnswer
Dec 17, 2024 - 02:15 AM
To set the time on the BALDR CL0007STH Digital Shower Clock, follow these steps:
1. Twist and lift the back cover of the clock to access the battery compartment.
2. Insert 2 AAA batteries, making sure to match the polarity (+/-) correctly.
3. Once the batteries are installed, the clock will automatically display the current time.
4. Press and hold the "TIME" key on the main unit to enter the time setting mode. The figure to be set will start flashing.
5. Use the "UP/CF" key or the "DOWN" key to adjust the data. Holding either key will quickly adjust the data.
6. Press the "TIME" key to confirm the setting and move to the next setting. The order of settings is Minute -> Hour -> Exit.
7. If there is no operation within 15 seconds while setting the time, the clock will save the current data and exit the setting mode.
8. To switch between 12-hour and 24-hour time format, press the "TIME" key on the normal display mode.
Note: In normal time display mode, you can press the "DOWN" key to turn on/off the key tone.
For more detailed instructions and information, please refer to the BALDR CL0007STH Digital Shower Clock User Manual.
Add New Comment